FOAMING AGENT

DESCRIPTION

This foaming agent is a special formula from Bafry Products Co.
Compatible with Bafry products.
Compatible with all types of anionic and non-ionic products.
It can work in both cold and hot conditions.
It is biodegradable.
Safe during handling and storage.
Acidic pH.

APPLICATION AND DILUTION

Special foaming product, compatible with Bafry products in all applications.

COMPOSITION / INGREDIENT INFORMATION

Ingredients CAS No Conc.%
Non-ionic ethoxylated product ----------- 5 - 10
Anionic ether compound 9004-82-4 4 - 10
Ammonium salt ----------- 1 - 3
2-[(3-Dodecanamidopropyl)dimethylaminio]acetate ----------- 1 - 3
Anionic surfactant ----------- 2 - 5
Water 7732-18-5 to 100
This is a commercial product whose exact ratio of components may vary slightly.
Minor quantities of other non-hazardous ingredients are also possible.

PHYSICAL AND CHEMICAL PROPERTIES

Physical description and colour Pale yellow viscous liquid
Odour Odourless
Boiling Point More than 100 °C at 100 kPa
Freezing Point Approximately -5 °C
Solid content More than 15%
Ionic properties Non-ionic – anionic
Specific Gravity approx. 1.1
Water Solubility Completely soluble in water
pH Lower than 5
Biodegradable Yes
Foaming very high

RECOMMENDED DILUTION:

Usage: 5–20 ml/L, depending on the density of foam required.

HAZARDS IDENTIFICATION

This product is classified as: Non-hazardous according to the criteria of SWA.
Risk phrases: Not hazardous – no criteria found.
Safety phrases: Avoid contact with eyes.
SUSDP classification: None allocated.
ADG classification: None allocated. Not a dangerous good under the ADG Code.

FIRST-AID MEASURES

General Information:

You should call the Poisons Information Centre if you feel that you may have been poisoned, burned or irritated by this product.
Have this MSDS with you when you call.

Inhalation:

First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.

Skin Contact:

Irritation is unlikely. However, if irritation does occur, flush with gently flowing water for 5 minutes or until the product is removed.

Eye Contact:

No effects expected. If irritation does occur, flush the contaminated eye(s) with gently flowing water for 5 minutes or until the product is removed.
Obtain medical advice if irritation becomes painful or lasts more than a few minutes.
Take special care if the exposed person is wearing contact lenses.

Ingestion:

If the product is swallowed or gets into the mouth, do NOT induce vomiting; wash the mouth with water and give some water to drink.
If symptoms develop, or if in doubt, contact a Poisons Information Centre or a doctor.

FIRE-FIGHTING MEASURES

Fire and Explosion Hazards: There is no risk of an explosion from this product under normal circumstances if it is involved in a fire.
Only small quantities of decomposition products are expected from this product at temperatures normally achieved in a fire. This will only occur after heating to dryness. Fire decomposition products from this product are likely to be irritating if inhaled.

Extinguishing Media: Not combustible. Use extinguishing media suited to burning materials.

Fire Fighting: If a significant quantity of this product is involved in a fire, call the fire brigade.

Flash point: Does not burn.

Upper Flammability Limit: Does not burn.

Lower Flammability LimitDoes not burn.

Auto-ignition temperature: Not applicable – does not burn

Flammability Class: Does not burn.

ACCIDENTAL RELEASE MEASURES

Accidental release:

Minor spills do not normally need any special cleanup measures.
In the event of a major spill, prevent the product from entering drains or watercourses.
As a minimum, wear overalls, goggles and gloves. Suitable materials for protective clothing include rubber and PVC.
Eye/face protective equipment should comprise, as a minimum, protective glasses and preferably goggles.
If there is a significant chance that vapours or mists are likely to build up in the cleanup area, we recommend that you use a respirator. Usually, no respirator is necessary when using this product. However, stop the leak if it is safe to do so, and contain the spill.
Absorb with sand, vermiculite or other suitable absorbent material. If the spill is too large or if absorbent material is not available, try to create a dike to stop the material from spreading or going into drains or waterways.
Sweep up and shovel or collect recoverable product into labelled containers for recycling or salvage, and dispose of promptly. Can be slippery on floors, especially when wet.
Recycle containers wherever possible after careful cleaning. After spills, wash the area, preventing runoff from entering drains. If a significant quantity of material enters drains, advise emergency services. This material may be suitable for approved landfill.
Ensure the legality of disposal by consulting regulations prior to disposal.
Thoroughly launder protective clothing before storage or reuse.
Advise the laundry of the nature of the contamination when sending contaminated clothing for laundering.

EXPOSURE CONTROLS / PERSONAL PROTECTION

Eye Protection: None required under normal conditions.
Skin Protection: None required under normal conditions.
Respiratory Protection: None required under normal conditions.
Ventilation:None required under normal conditions.
Protective Equipment or Clothing:None required under normal conditions.

STABILITY AND REACTIVITY

Reactivity: This product is unlikely to react or decompose under normal storage conditions. However, if you have any doubts, contact the supplier for advice on shelf-life properties.
Conditions to Avoid:None known
Incompatibilities: No particular incompatibilities.
Fire Decomposition: Only small quantities of decomposition products are expected from this product at temperatures normally achieved in a fire. This will only occur after heating to dryness. Carbon dioxide and, if combustion is incomplete, carbon monoxide. Nitrogen and its compounds, and under some circumstances, oxides of nitrogen. Occasionally hydrogen cyanide gas in reducing atmospheres. Oxides of sulphur (sulphur dioxide is a respiratory hazard) and other sulphur compounds. Most will have a foul odour. Water, sodium compounds. Carbon monoxide poisoning produces headache, weakness, nausea, dizziness, confusion, dimness of vision, disturbance of judgement, and unconsciousness followed by coma and death.

ECOLOGICAL INFORMATION

Insufficient data to be sure of status. Not expected to be an environmental hazard. (ECO-FRIENDLY)

TOXICOLOGICAL INFORMATION

Target Organs:There is no data to hand indicating any particular target organs.
Classification of Hazardous Ingredients
Ingredient risk phrases
No ingredient mentioned in the HSIS Database is present in this product at hazardous concentrations

DISPOSAL CONSIDERATIONS

Disposal: This product may be recycled if unused, or if it has not been contaminated so as to make it unsuitable for its intended use. If it has been contaminated, it may be possible to separate the contamination in some way. Only if neither of these options is suitable, consider landfill.

SHELF LIFE

FOAMING AGENT Shelf life is two years under normal conditions and in unopened containers.

STORAGE INSTRUCTIONS

FOAMING AGENT Can be stored at temperatures below 50 °C.

REGULATORY INFORMATION

All of the significant ingredients in this formulation are compliant with international regulations.

TRANSPORT INFORMATION

This product is not classified as a Dangerous Good. No special transport conditions are necessary unless required by other regulations.
D.O.T. shipping name: Foaming agent
D.O.T. hazard class: Not detected
UN./N.A. Number # R36---R43

OTHER INFORMATION

PREPARATION INFORMATION: PREPARED BY our formulators

DISCLAIMER: ALL INFORMATION IS BELIEVED

TO BE ACCURATE BUT DOES NOT IMPLY A WARRANTY OR GUARANTEE.

Deutsch